pipelex.docgen.print_timeout
Printing the document took too long
| Type | https://docs.pipelex.com/errors/pipelex.docgen.print_timeout |
| Family | pipelex.docgen: The document engines that print a PipeDocGen step's documents. |
| Domain | runtime: nobody could have acted beforehand, so whoever made the call waits, retries or reports the problem |
| Retry | yes: repeating the operation may succeed, after retry_after seconds when the problem gives it |
| HTTP status | 504 |
| Raised as | a problem document, sent as the body of an HTTP response or kept in a run's record |
What it means
The print, or a resource it read, ran past its limit and was stopped.
What to do
Run the method again. If the print keeps running past its limit, make the document lighter, or report it to whoever runs the runtime.
Next steps
A problem carries the step aimed at whoever reads it: the first when its reader is the domain's actor, whoever made the call, and the second for any other reader.
| Reader | Kind | Detail |
|---|---|---|
| The domain's actor | retry |
Run the method again, since the print may finish within its limit. |
| Any other reader | retry |
Run the method again, since the print may finish within its limit. |
Detail
The problem's detail is written from this template, filled with the occurrence's parameters:
Printing the document ran past its limit of
{limit}seconds and was stopped.
Parameters
Every parameter is present on every occurrence of the code.
| Name | Type | Description |
|---|---|---|
limit |
seconds |
The time the print was allowed. |
See also
- The MTHDS error registry format, which describes the members of this page
- Error Codes, every Pipelex code